| Our fabricators are
supported with the resources to get your job done.
Facility
Our modern, 44,000 square foot facility is located on over 6 acres.
High, wide bays accommodate 18' under the hook.
Production
Equipment
In addition to the major pieces listed below, PWC Fabrication has an
extensive inventory of auxiliary equipment to complete your
fabrication requirements.
PRESS
BRAKES
400 Ton - Plate 3/8" x 14'
@ 90 Degree BendIRON WORKERS
Angle Shear: 6" x 6" x 1/2" Max.
Bar Shear: 3/4" x 12" Max.
Channel: C8 x 11.5 Max.
Round Rod: 7/8" Max.
Square Bar: 7/8" Max.
Punch: 13/16" Diameter
in 3/4" Plate Max.
HYDRAULIC PLATE SHEARS
Sheet: 20 GA. thru Plate: 3/8";
10' Max.
Plate: 1/8" thru 3/4"; 14' Max.
HYDRAULIC PLATE ROLL
Plate: 1/2" x 10'
Plate: 3/4" x 4'
Plate: 1" x 2'
18" Min. Diameter
MECHANICAL PLATE ROLL
Sheet: 10 GA. X 6'
Plate: 3/16" x 3'
Plate: 1/4" x 1'-6"
Plate: 5/16" x 1'
8" Min. Diameter
HYDRAULIC PUNCHES
125 Ton Flange Punch; 1" Dia.
100 Ton Web Punch; 1" Dia.
Plate: 1"; 1-1/4" Max. Dia.
Plate: 3/4" - 1-1/4";
13/16" Max. Dia.
|
ANGLE
ROLLS
Angle: 4" x 4" x 3/8"
Leg Out; 8' Min. Dia.
3-1/2” x 3-1/2” x 3/8”
Leg In; 10' Min. Dia.
Bar: 5/8” x 4”
Hardway; 10' Min Dia.
Bar: 1-1/2" x 7"
Easyway; 4' Min. Dia.
Square Bar: 2-1/2" x 2-1/2";
4' Min. Dia.
S3 & S4 Beams
Easyway; 6' Min. Dia.
SAWS AND DRILLS
V-100 HE & M Vertical
Band Saw: 16" x 18"
VT130HM Vertical
Band Saw: 20” x 24”
Sharp 4' Radial Arm Drill
PLASMA ARC
Thermal Dynamics 8 XR
Lincoln Pro-Cut 125
1-1/4" Stainless, Aluminum
& Hot Roll Plate Max.
FLAME CUTTING MACHINE
4 Torch & 1 Plasma Head
Plasma: 3/4" Plate Max.
Oxyfuel: 4" Plate Max.
Watertable Size - 10' x 20' Max.
PIPE BENDER
1/4" Dia. Thru 2" Dia. Sch. 40;
180 Degree Max.
MISCELLANEOUS EQUIPMENT
Two (2) Track Torches
One (1) Threading Machine
PAINTING
Airless Electrostatic
40' x 100' Paint Room |
Material Handling
Equipment
FORKLIFTS
20,000 lb. CLARK with 10' Lift
15,000 lb. CAT with 10' Lift
8,000 lb. CAT with 15' Lift |
OVERHEAD
CRANES
(9) 5 ton capacity with 40' and
50' spans. |
CAD Expertise and
Computer Support
PWC detailers utilize AutoCad and other detailing software to give
our fabricators the drawings necessary to get an accurate product
out the door.
E-mail and Internet access offers customer services such as drawing
transmittal.
Quality Assurance
While project plans and specifications establish quality standards,
at PWC Fabrication we believe that these are only the minimum
acceptable levels of quality required. For us, quality is an
"attitude towards perfection." By using quality materials
and quality parts, you can expect quality fabrications.
The process must start with
verifiable raw materials purchased only from those suppliers who can
furnish mill certs. With one of the best-equipped shops in
the Midwest, the PWC team can then produce quality parts.
Fabrication is complete only when these parts have been joined with
precise welding. PWC performs all welding operations to the American
Welding Society (AWS) Welding Code D1.1 and by the use of personnel
who are AWS Certified Welders.
We share our customers' concerns
about the end use, durability, fitness and strength of each weldment.
As a result, PWC fabricators routinely join parts with more footage
and larger welds than the minimum specified on plans or in
specifications.
Our attitude towards perfection
continues by removing weld splatter; surface rust and scale in
preparing for primer and finish paint according to the customer's
request.
Few custom fabrication shops can be
as proud as PWC Fabrication is of the diligent care we take to make
sure our customers receive finished products exceeding expectations.
 Back
to top
|
